High Resolution Auto Parts DMLS Prototyping 3d Printing For Automotive
· Metal parts, fire test parts, fixture direct manufacturing and model demonstration test.
· Development of new products.
· Creative design and display of culture, creativity, clothing, household goods and other.
· Research and development of implants, teeth, skull repair, prosthetics and medical
equipment.
· Product design, rapid production of high-precision injection molds.
1. DMLS is also one of the few additive manufacturing technologies being used in
production. Since the components are built layer by layer, it is possible to design internal features and
passages that could not be cast or otherwise machined.
2. Compared with traditional manufacturing techniques, the speed of DMLS is the most
obvious because no special tooling is required and parts can be built in a matter of hours.
3. DMLS allows for more rigorous testing of prototypes. Since DMLS can use most alloys, prototypes can now
be functional hardware made out of the same material as production components.
4. Complex geometries and assemblies with multiple components can be simplified to fewer parts with a
more cost effective assembly. DMLS does not require special tooling like castings, so it is convenient for
short production runs.
| Technical Specifications for Direct Metal Laser Sintering |
| Technique Specifications of EOSINT M 280 | Equipment |
| Building volume | 250 mm x 250 mm x 325 mm (9.85 x 9.85 x 12.8 in) | 
|
| building platform | 9.85 x 9.85 x 12.8 in |
| Laser type | Yb-fibre laser, 200 W oder 400 W (optional) |
| Precision optics | F-theta-lens, high-speed scanner |
| Scan speed | up to 7.0 m/s (23 ft./sec) |
| Variable focus diameter | 100 - 500 μm (0.004 - 0.02 in) |
| Power supply | 32 A |
| Power consumption | maximum 8.5 kW / typical 3.2 kW |
| Nitrogen generator | integrated |
| Compressed air supply | 7,000 hPa; 20 m3/h (102 psi; 706 ft3/h) |
| Argon supply | 4,000 hPa; 100 l/min (58 psi; 3.5 ft3/min)(optional) |
Service Step for a Project
Rapid Prototyping & Manufacturing Process
Inspection Equipment-Three coordinate measuring
For its high precision flexible three coordinate measuring technology and excellent digital capability, become
a modern manufacturing especially mold industrial design, development, manufacture and quality assurance.
YanHua company now in U.S. F
ARO company produces the Platinum FaroArm 2.4 m joint arm type measuring instrument, measurement
accuracy of + / - 0.03 mm.
Three coordinate measuring machine can be applied to 3 d digital analog input, will the molding samples or
related to the da location, size, shape tolerance, curve and curved surface are compared, and measuring the
output graphical reports, intuitive clearly reflect the quality of the products, thus forming a complete sample test
report.
Claim Terms:
We produce the products or samples according to your requirements. If our products can not reach your
requirements ,two solutions as follow:
1, we will produce your products again until reaching your reuirments for free.
2, we give the refund and you send us our products by international express.
Product Tags:
|
|
High Resolution Auto Parts DMLS Prototyping 3d Printing For Automotive Images
|
